XDS Receiver FAQ
How do I know my XDS receiver can receive programs from the Westwood One satellite carrier?
You can verify the XDS receiver is tuned and locked to our satellite carrier as follows:
The front panel LCD screen will display:
(# = numerical value other than zero; a good EB is above 6.0; a good AG is between 20 and 90)
Query the receiver frequency as follows:
1. Set up a HyperTerminal session on a PC at 115200 8.N.1
2. Connect serial DB-9 from PC to Pro-1 Console Port in rear of receiver
3. At prompt, type 'login tech radio'
4. This will then reply 'You are logged in as TECH'
5. At prompt type 'Tuner Show' and it should return:
RF: 1000500 kHz
SR: 9259500 sps
DR: 12800000 bps
How do I find my Program in XDS?
If you’ve never done this before you’ll need your XDS receiver serial number and daily password which are available in the Setup menu of Pro-4 receivers. Log in to the Affiliate site (http://myxdsreceiver.cmneng.com) and choose the radio station whose satellite programming you want to see. Then select the tab: Program List. A list of programs for that station will appear alphabetically in the drop down menu. Select your program by highlighting and clicking.
What if I can not find my Program in the list?
Some programs require special authorization based upon your affiliation agreement with the program provider. You will need to contact Technical Services at 914-908-3210 or firstname.lastname@example.org to become authorized for such programs. Note that some programs are listed by the syndicator’s name or abbreviation. Others are listed by program title or the host’s name.
How do I schedule my Program?
Log in to the Affiliate site (http://myxdsreceiver.cmneng.com) hover your mouse pointer over the Help menu and click on the Scheduling Primer. This document will walk you through the process.